Residential Green Building Code Compliance in Dallas
Green Building Energy Sustainability (GBES) provides residential green building code compliance services for builders and developers in Dallas–Fort Worth, including plan reviews, inspections, verification and final compliance affidavits for projects in the City of Dallas.
Building in Dallas? Green Building compliance is not optional—it’s required.
GBES supports single-family projects under the program.
Since 2011, approved third-party Green Building Providers have been permitted to conduct pre-permit plan reviews and final inspections for project completion.
By working with local developers, Green Building Energy Sustainability Inc. (GBES) can help to design a complete and coordinated green building as the project is designed and completed through this process.
GBES is a registered Green Building Provider with the City of Dallas, enabling the Green Building Industry to conduct planned reviews, inspections, verification, and final compliance affidavits.
We help builders catch problems early, which reduces the risk of delays. GBES reviews your project against the program’s requirements.

What Is the Dallas Green Building Program?
The Dallas Green Building Program is the City of Dallas’s own ordinance. It applies inside the city limits and is separate from the energy code. Its current Phase 2 requirements took effect on October 1, 2013.
Required for: new construction, additions and first-time tenant finish-outs. Not required for: renovations and remodels, or small additions and accessory structures that meet the City’s exceptions.
Ways to comply on a home: the Dallas Prescriptive Path, Green Built Texas, ICC 700 (NGBS) or another program approved by the Building Official. Rating system paths don’t require formal certification.
The process: a registered third-party provider reviews plans and submits a notarized affidavit before you apply for a permit, then inspects the work and sends the City a compliance affidavit before the final building inspection. Energy code compliance is shown separately. See the City’s Green Building Forms page.
Dallas Single-Family Green Building Code Compliance
The City of Dallas Prescriptive Green Building Program focuses on:
- Stormwater Management
- Energy Efficiency
- Water Conservation
- Heat Island Mitigation
- Indoor Air Quality
All selections must:
- Be specified during Plan Review
- Be documented during construction
- Be verified at Final Green Building Inspection
Failure to comply can delay final approval and certificate of occupancy.
Stormwater Management Requirements (Dallas Residential)
Dallas requires that 70% of non-roof area meets one of the following requirements:
1. Vegetative landscaping
2. Permeable paving
3. Sloped for water runoff to a permanent filtration feature
We verify documentation and compliance during inspection.
Water Efficiency Requirements
The City of Dallas will require drip irrigation emitters and at least three accepted water-reduction measures.
Required:
- Bedding areas drip irrigation per approved landscape plan
Water Reduction Strategies (3 minimum):
- Lavatory Faucets ≤ 2.0 GPM
- Showerheads ≤ 2.0 GPM
- Toilets ≤ 1.3 GPF, dual flush (ASME A112.19.14), or EPA WaterSense compliant
- ENERGY STAR dishwashers (≤ 6.0 gallons per cycle)
- ENERGY STAR clothes washers (MEF ≥ 2.0, water factor < 5.0)
GBES reviews submittals for compliance and verifies the quality with final inspection.
Heat Island Mitigation Requirements
Dallas needs one of the following energy-efficient roofing options:
- ENERGY STAR qualified roof (slope 2:12 or greater)
- Approved vegetated roof system
- Radiant barrier with conventional shingles
- Encapsulated foam insulation (R-22 or greater)
We validate roofing compliance.
Energy Efficiency – Dallas Energy Code Compliance
All Projects Must Comply with the Dallas Energy Code Based on IECC 2021 (Effective May 2023).
This involves
- Insulation requirements
- Air sealing validation
- Blower door testing
- Duct performance testing
- HVAC system efficiency standards
GBES delivers energy needs, tests, and documentation to meet Dallas energy code standards.
Indoor Air Quality Standards
Dallas Green Building Standards Indoor air quality inspections:
HVAC & Duct Location
- Air handling equipment and ductwork outside the garage fire envelope
Garage Contaminant Control
- Sealed penetrations between garage and conditioned space
- Sealed joist bays
- Weather-stripped doors
- Sealed cracks at wall bases
Air Filtration
- Minimum MERV 8 filters
- Properly sized air handlers
- Airtight filter housings
GBES verifies indoor air quality compliance at the final inspection.
Final Green Building Inspection in Dallas
Once checklist selections are processed under the Dallas Prescriptive Path Green Building Checklist:
- GBES conducts Final Green Building Inspection
- Ensures compliance and installation
- Final Inspection Compliance Affidavit
- Enables the City to close out the Green Building trade officially
We help you avoid re-inspections, delays, and expensive corrections.
Why the Dallas Green Building Compliance Community Selects GBES
- City of Dallas certified
- Experience in 2021 with IECC enforcement
- Timely schedule for construction projects
- Quickly complete the inspection process
- Comprehensive energy testing & confirmatory
We understand your City of Dallas permitting requirements—and how to continue your project.
Reduce Delays. Prepare for Inspection. Close Out Faster.
Green Building compliance in Dallas must be documented, verified, and experienced in practice.
GBES helps you work through the City of Dallas Green Building requirements for the home you are building
Green Building Energy Sustainability Inc.
Main Office:
940-891-3803
Spanish Line:
682-246-8150
Schedule your Dallas Green Building review today.
