Skip to content Skip to footer
Detect Hidden Water Damage Before It Worsens and Transforms into a Major Repair.

Moisture Inspections and Leak Detection in Dallas–Fort Worth

Serving Dallas–Fort Worth, Austin, San Antonio and surrounding Texas communities.

Water damage rarely starts where you can see it. Moisture moves through walls, ceilings, insulation and flooring long before a stain, a musty smell or mold shows up.

Green Building Energy Sustainability (GBES) finds it early. Our Level II and Level III certified thermographers use infrared cameras to locate hidden moisture in homes and commercial buildings across Dallas, Fort Worth, Denton, Plano, Frisco, McKinney, Allen, Prosper, Celina, Little Elm, Lewisville, Keller and nearby communities, without opening walls.

5 (2)
Cracked drywall at a wall and ceiling corner
Infrared image showing a cool spot at a cracked wall corner

Thermal Imaging Leak Detection vs. Visual Inspections

Traditional inspections rely on what you can see. By the time bubbling paint, warped flooring or ceiling stains show up, the damage may have been spreading for weeks or months.

 Infrared thermal imaging enables us to:

  • Detect temperature differences due to trapped moisture.
  • Look for water penetration behind drywall and ceilings.
  • Identify roof leaks and flashing failures.
  • Point to possible slab or plumbing leaks.
  • Check drying after water damage restoration.
  • Avoid destructive tear-out.

Instead of guessing, you see where the moisture is.

Early Moisture Detection Has Financial Consequences

In Texas heat and humidity, a small leak can turn into a large repair, or an insurance claim, quickly. Infrared imaging helps you:

  • Catch problems while repairs are still small.
  • Lower the risk of mold remediation.
  • Document conditions for insurance and warranty claims.
  • Protect property value.
  • Keep downtime short for businesses.
  • Open only the wall or ceiling that needs it.

Finding moisture early costs far less than late-stage restoration.

Moisture and mold staining on a ceiling or wall surface
Infrared image showing a cool area where a wall meets the ceiling

Protect Against Mold Growth

Moisture trapped in walls or insulation is what mold needs, especially in Texas weather. Infrared scanning helps find:

  • Hidden condensation problems.
  • HVAC-related moisture.
  • Roof and building envelope failures.
  • Plumbing leaks inside walls.
  • Slab moisture.

GBES finds where the moisture is and where it is coming from. We don’t test for mold; if mold testing is needed, a licensed mold assessor handles that step.

Who we help:

  • Homeowners, buyers and sellers
  • Property managers
  • Commercial and office buildings
  • Healthcare facilities, schools and churches
  • Retail centers
  • Builders and roofers checking a repair
  • Post-storm damage assessments

Why GBES for Moisture Inspections in Dallas–Fort Worth

  • Level II and Level III certified thermographers — trained to tell moisture apart from normal temperature patterns.
  • Non-invasive — no holes and no tear-out to find the problem.
  • Clear reports — every thermal image next to a regular photo of the same spot.
  • Next steps — what each finding likely means and what to do about it.
  • Fast scheduling — often next day, otherwise a day or two out.
Two technicians with a laptop inspecting a commercial roof
Two people stand on a sunny street, looking at a map. The woman has a ponytail; the man points at the map. Modern buildings surround them
Engineer in a hard hat and safety vest using a tablet in a field
Engineer in a hard hat reviewing a tablet outdoors

When Do You Schedule an Infrared Moisture Inspection?

  • After a roof leak
  • Following plumbing repairs
  • After a storm
  • When mold is suspected
  • When musty odors persist
  • When engaging in real estate transactions
  • As part of an energy audit
  • Before warranty expiration

The earlier the moisture detection occurs, the lower the repair cost.

Stop Water Damage Before It Spreads

Infrared moisture detection is one of the most cost-effective diagnostic tools for Texas properties.

Frequently Asked Questions

Can a thermal camera see water behind a wall?
Not directly. It reads surface temperatures, and wet materials usually read cooler than dry ones. That pattern on the surface shows where moisture is, and our thermographers are trained to tell it apart from normal variations.

Do you test for mold?
No. GBES finds where moisture is and where it is coming from. If mold testing is needed, a licensed mold assessor handles that step.

Will you need to open walls or ceilings?
No. The inspection is non-invasive. It pinpoints the wet area so any repair can be targeted instead of opening whole walls.

When is the best time to schedule?
As soon as possible after a leak, storm or stain appears, while the area is still wet. A leak that has fully dried can be hard to see.

What do I get after the inspection?
A report with each thermal image next to a regular photo of the same spot, what each finding likely means, and recommended next steps.

How soon can you come out?
We can sometimes schedule next day; otherwise it’s usually a day or two out, and we work around your schedule.

Do you check commercial roofs?
Yes. Infrared roof scans find wet insulation under the roof membrane so repairs can be targeted.

Serving Dallas, Fort Worth, Central Texas, Austin, and San Antonio

Green Building Energy Sustainability Inc.

Main Office:

940-891-3803

Spanish Line:

682-246-8150

Find it early. Fix it precisely. Protect your investment.


    Green Building Energy Sustainability · Denton, TX · 940-891-3803
    ©2026 Green Building Energy Sustainability | Our Mission is to use better planning for a more efficient tomorrow